NYC & NJ Finest Doorman Blog

Exterior Rolling Open Grille & Hole Gates in New York

Posted by Wendell Daguno on Wed, Mar 09, 2016 @ 08:16 PM

 

New York City and New Jersey often require exterior roll down grille gates to be mounted between two walls.  These free-standing units are mounted to steel tubes that are bolted and/or embedded in concrete.  Our roll-up gates provide security to your open lot.   You can get your gate with mesh material, perforated holes, fenestrations and more. 

Our team of Super Techs are ready to install your door system.  Our Made in American doors are proudly made in our Pennsylvania plant.  Lead times range from one week to 4-5 weeks. 

Exterior-rolling-grille-gate-brooklyn-queens-bronx-ny.jpg

Request Estimate

roll-down-grille-gate-new-york.jpg

 

tubular-bottom-bar-exterior-grille.jpg

Design Consultation

rolling-steel-door-coil-cord-for-safety-edge.jpg

 

 

roll-up-grille-gate-new-york.jpg

Request an Estimate

exterior-free-standing-parking-lot-roll-down-gate.jpg

NYC-roll-up-gate-parking-lot-outside.jpg

Design Consultation

perforated-mesh-metal-slat-rolling-gate-door.jpg

Overhead Door Company of The Meadowlands & NYC is a Division of Loading Dock, Inc.  For more information, please give us a call at 973-471-4060 or email us at: info@dockndoor.com We service Northern New Jersey (Bergen, Passaic, Hudson, Union, Essex, Morris, Hudson, Hunterdon, Middlesex, Mercer and Somerset county/counties), Manhattan, New York City, Brooklyn, Queens, Staten Island, Bronx, Westchester and Rockland. 

  For 24 hour emergency service, please contact us at 800-362-6367.

Tags: Queens, Brooklyn, Rollup Doors, nyc, metal rollup gates, Rolling Grilles, nj, estimate, made in american doors, open hole overhead doors, rolling gates, roll-up gates, brooklyn gates, open grille rolling doors, perforated rolling doors, rolling mesh grille gate, lift up gates, lift-up doors, repair, service, maintenance

Rolling Door for Slanted Floors

Posted by Jai Patel on Mon, Dec 07, 2015 @ 08:04 PM

In the Metro NYC NJ area, slanted or sloped sidewalks & driveways is common.  We have a way to accommodate the slope and still make a tight seal on the floor.  Our pitch plate bottom bars can accomodate sloping or irregular sills like odd shaped floor conditions (rails, tracks, curbs, slopes).

Crooked sidewalk and floor problems can be resolved with sloping bottom bars of our rolling doors.  We can help reduce water leakage into the building with larger bottom weather seals.

It is important to do a quality site measurement to be sure you have enough headroom for a sloped roll up gate.   You need to consider that the excess steel in the slope needs to hide behind the header as it cannot roll up into the coil of the coiling door.  Therefore additional headroom is required for the coiling slats to clear the opening height.

Sloping rolling gates can be powdercoated in many colors.  The roll down doors can have security slide bolts with interlock motor integration. You have the ability to integrate safety features like photo eyes and light curtains.

Here are some photos:

 

roll_down_door_slanted_floor.jpg

Request an Estimate

parking-garage-gate-company-design-ny-nj.jpg

 

slanted_driveway_rolling_grille_coiling_door_nyc_ny.jpg

Design Consultation

pitched-floor-roll-down-gate.png

Request Estimate

Powder_Coat_Insulated_Roll_up_door-with-pitched-plate-bottom-bar.png

Request an Estimate 

slopped-slanted-side-walk-rolling-door-system.png

To learn more about other options, check out our product catalog and choose the right commercial door and dock for your facility. Spend some time looking at the sectional doorsrolling steel doors, other industrial doors and the accessories like commercial operators that you can find at the Overhead Door Company of The Meadowlands & NYC. You will appreciate not only our amazing selection but also the level of customer service and care you receive from our team of overhead door experts. You can also read other entries in our blog.

For more information, please give us a call at 973-471-4060 or email us at: info@dockndoor.com We service Northern New Jersey, Manhattan, New York City, Brooklyn, Queens, Staten Island, Bronx, Westchester and Rockland. 

Tags: rolling steel doors, Rolling Grille, Metal Roll-Up Doors in Manhattan, slanted sidewalks, metal rollup gates, metal roll down gates, slopping sidewalks, slanted floors, slanted driveways, rolling door for odd shaped floor, rolling door for train rails, rolling gates for train tracks, curbs, train tracks, train rail lines, slopping bottom bar, sloping bottom bar, pitch plate bottom bar

NYC Roll-down doors and gates visibility requirements

Posted by Jai Patel on Mon, Nov 02, 2015 @ 03:02 PM

Roll-down gates or roll-up doors, are under scrutinity from the department of buildings.  A few years ago, the City Council passed a resolution requiring all storefront shutters, mesh gates, open air shutters, coiling grille gates, coil-up doors and roller gates to have 70% or more in visibility.  The code is forever changing our city's landscape.  We feel it is upgrading the city's look to one that favors a safer and more business friendly environment.  

See here for a bulletin.  

Tags: security grille, Rolling Grille, nyc, metal rollup gates, grilles, new york gates, new york city gates, roll down gates, storefront gates, perforated rolling doors, NJ gates, rolling steel overhead doors