NYC & NJ Finest Doorman Blog

Non-Insulated & Insulated Metal Slat Coiling Door

Posted by Jai Patel on Jan 16, 2016 3:26:16 PM

Non-insulated Metal Slat Overhead Coiling Doors offered by Overhead Door Company of the Meadowlands & NYC.

Constructed of galvanized steel, stainless steel or aluminum in a variety of slat profiles, finishes and options.
•Standard doors are designed to meet 20psf (90mph to 110mph) wind resistance.
•Higher windload and seismic validation available.
•Perimeters’ sealing are designed to reduce air leakage and keep climate controlled air in and the elements out.
•Extra heavy-duty slats fabricated of galvanized steel in up to 14 gauge with a curved profile
•Designed but not limited to oversized applications where herculean size and strength are required.

Insulated Metal Slat Overhead Rolling Doors

Insulated rolling service doors are used when durability, security, overall performance and thermal efficiency are required.
•Standard door is designed for 20psf (90mph to 110mph) wind resistance.
•Perimeters’ sealing are designed to reduce air leakage and keep climate controlled air in and the elements out.
•Roll-formed flat slats sandwich CFC and HCFC free polyurethane insulation to provide extra protection against the elements with R-values up to 10.9, U-Factor of no higher than 1.00, through curtain STC up to 28, and install STC up to 21.
•Weatherseals reduce the number of air exchanges between two climate/temperature controlled environments through a fenestration assembly, such as door or window. When it comes to perimeter sealing more is found to be better.
•When selecting an insulated door, it is important to review IECC (International Energy Conservation Code) requirements.
•Calculated R-value (also known as U-value) is an ASHRAE calculation of thermal resistance property of a material.
•Tested U-factor provides actual installed door energy transfer resistance and solar heat gain coefficient (SHGC). Energy transfer is the exchange of energy between two climate controlled environments. Solar heat gain coefficient is the amount of solar heat being absorbed by the door system. Generally, finish or color with high solar reflectance (bright colors) will provide lower solar heat gain coefficient and therefore lower U-factor. Lower tested U-factor provides lower energy transfer and lower solar heat gain.



For more information, please give us a call at 973-471-4060 or email us at:

We service Northern New Jersey (Bergen, Passaic, Union, Essex, Morris, Hudson, Somerset county/counties), Manhattan, New York City, Brooklyn, Queens, Staten Island, Bronx, Westchester and Rockland.

For 24 hour emergency service, please contact us at 973-471-4060.



Tags: Metal Slat Rolldown Door, Metal Slat Overhead Doors, Metal Slat Rolling Doors, Insulated Slat Stainless Steel Doors, Overhead Door repair, Rollup Door repair