Overhead Door Company of The Meadowlands & NYC

24 HR Emergency 1-800-362-6367

        SCHEDULE SERVICE          SCHEDULE ESTIMATE

Folding Scissor Gate Systems

Folding Scissor Gate Systems are designed to make your facility more secure, but also fold away in a compact style.

They fold easily back and out of the way when people or equipment need to pass, but provide a lockable barrier when closed. These gates are excellent for situations where compact, restricted access is a priority, but visibility and air flow are desired as well. Secure your warehouse, retail space, a community facility, an industrial space, and other restricted areas with these easy to install folding scissor gates. 

At Overhead Door Company of The Meadowlands & NYC, we offer side folding doors and overhead rolling doors that can fit any opening from the smallest cabinet up to the most massive retail entrances.

Folding Scissor Gates Systems - Commercial Sliding Doors NYC NJ


Scissor Folding Gate - EG Series Specifications

EG Series Gates are commonly installed on storefronts and in other retail and commercial applications.

These folding scissor gates offer a balance between security and economy. Vertical members are single steel channels extending into top and bottom tracks, alternating with steel flat bars, and connected with single rows of steel lattice bars traveling on formed steel glides for carefree operation.

Top hung or bottom rolling and can be single or b-parting with an option to pivot.

- MAXIMUM SIZE 16 ft. wide (single gate) or 32 ft. wide (bi-parting gate), 12 ft. high

- GATE BODY Alternating vertical 1” x 1/2" x 11 gauge steel channels and intermediate 3/4" x 3/16” steel flat bars, spaced approximately 5” apart, with 3 rows of 3/4" x 3/16” steel lattice bars riveted together through zinc plated steel washers and traveling on formed steel clips

- LEAD & REAR BARS 1 7/8” x 1 3/8” x 14 gauge formed steel box channel

- LOCKING Hasp suitable for padlocking gate in closed position (full height lock post on single gate), pivoting steel tie-back arm to hold gate in open position

- BOTTOM ROLLERS Machined steel ball bearing double-wheel non-swivel rollers traveling in 1 7/8” x 1 3/8” x 14 gauge formed steel box channel bottom track with rubber floor pads, track hinged when necessary to fold up and provide unobstructed access

- TOP GUIDE Full height vertical 1” x 1/2" x 11 gauge steel channels traveling through 1 7/8” x 2 3/8" x 14 gauge formed steel box channel top track

- FINISH Factory applied black or gray paint

- WARRANTY One year limited warranty (excluding finish)

EG Series - Scissor Gate Details: 

Folding_Scissor_Gate_Systems__EG_Series_Gate_Details_ NYC_NJ - 1Bi-Parting Gate with Hinged Bottom Track

Folding_Scissor_Gate_Systems__EG_Series_Gate_Details_ NYC_NJ
Single Gate (Left Stack Shown, Right Stack Opposite)

Common Options:

Folding_Scissor_Gate_Systems_EG_Doors_Common_Options_NYC_NJ - copia (2)

Pivoting Gate

Folding_Scissor_Gate_Systems_EG_Doors_Common_Options_NYC_NJ - copia (3)

Cylinder Locking Device

Folding_Scissor_Gate_Systems_EG_Doors_Common_Options_NYC_NJ - copia

High-Security Keyed Pin Lock

Folding_Scissor_Gate_Systems_EG_Doors_Common_Options_NYC_NJ

Gate Cabinets 
Surface mount shallow cabinet shown, recessed or deep cabinet designs available

 

Folding Scissor Gate

Contact Us

 

Folding Scissor Gate - DC Series Specifications

DC Series Gates are ideal for schools, banks and other at-risk locations.

These folding scissor gates are designed for maximum durability and security. Double steel channels, which extend into the top and bottom tracks, are riveted together to form each vertical member. Channels are connected with double rows of steel lattice bars traveling on nylon bearings and washers to operate with a minimum of effort. 

Available in almost any size, top hung or bottom rolling, single or bi-parting, with an option to pivot.

- MAXIMUM SIZE 17 ft. wide (single gate) or 34 ft. wide (bi-parting gate), 12 ft. high

- GATE BODY Vertical double 3/4” x 3/8” x 14 gauge steel channels, spaced approximately 6” apart, with 3 double rows of 5/8” x 3/16” steel lattice bars between channels, riveted together through zinc plated steel washers

- LEAD & REAR BARS 1 7/8” x 1 3/8” x 14 gauge formed steel box channel

- LOCKING Hasp suitable for padlocking gate in closed position (full height lock post on single gate), self-locking steel tie-back arm to hold gate in open position

- BOTTOM ROLLERS Machined steel ball bearing double-wheel non-swivel rollers traveling in 1 7/8” x 1 3/8” x 14 gauge formed steel box channel bottom track with rubber floor pads, track hinged when necessary to fold up and provide unobstructed access

- TOP GUIDE Full height vertical double 3/4” x 3/8” x 14 gauge steel channels traveling through 1 3/8” x 2 5/8" x 11 gauge formed steel channel top track

- FINISH Factory applied black or gray paint

DG Series - Scissor Gate Details: 

Folding_Scissor_Gate_Systems__DG_Series_Gate_details NYC NJ - 1Bi-Parting Gate (With Hinged Bottom Track)

Folding_Scissor_Gate_Systems__DG_Series_Gate_details NYC NJ

Single Gate (Left Shown, Right Stack Opposite)

Common Options:

Folding_Scissor_gate_Systems_DG_series_common_options NYC NJ - copia (2)

Pivoting Gate

Folding_Scissor_gate_Systems_DG_series_common_options NYC NJ - copia (3)

Cylinder Locking Device

Folding_Scissor_gate_Systems_DG_series_common_options NYC NJ - copia

High-Security Keyed Pin Lock

Folding_Scissor_Gate_Systems_EG_Doors_Common_Options_NYC_NJ

Gate Cabinets 
Surface mount shallow cabinet shown, recessed or deep cabinet designs available

 

Contact Us

If you need more specs, or would like to get a quote, please contact our team. You can call at 973-471-4060 or email us at info@dockndoor.com 

We've been serving NJ and NYC Metro area for 40+ years!